Minim OSD has the
analog side, 12V to power up the transmitter and camera and the digital side have 5 V power supply. But it
will cause heating issue. To overcome the overheat problem, solder together the
two packs the one in the front and the another one at the back so that the board
is only power up by the digital side which is 5V
Next search the key
word “minim osd extra” at google and go in the website name https://code.google.com/p/minimosd-extra/ and
download the configuration tools for the minim osd.
After that connect the minim
osd to the usb adaptor and the board will start blinking.
It has a reset button to reset the board. So if
we do any changes, we need to reset the button.
One of the problem faced is
that might cause the flickering on the tv screen. So to fix the problem, make
sure the COM is correct on the configuration tools. On the video mode, choose
the PAL. Then, on panel 1, remove the thing that is not needed and on panel 2
is removed everything.
Lastly, made sure to updated
the firmware and charset and can start play choose panel.
No comments:
Post a Comment